- Adopt sub-arc welding technology;
- Applicable to bottom-to-top tank erection, hanged on shell top;
- First X-RAY qualification rate above 99%;
- More suitable for erection of tanks larger than 30M;
- Two welding systems, high efficient welding.
AUTO Automatic Girth Seam Welding Machine (AGW) series products are a kind of effective and efficient automatic equipment, which can complete the welding of butt joint girth seams with capabilities of one-off compulsory shaping of welding seams.
It has below Features:
-
Applicable for "top to bottom" storage tanks outside welding of girth seam
-
Suitable for tank radium 4.5 m and over
-
Adjustable welding-traveling frame height for tank shell plate 1.5m to 2.8m wide
-
Suitable for tank plate wall thickness is from 10mm to 50mm.
-
The cross slide of welding head can move 10cm horizontal and 10cm vertical
-
Motor frequency inverter drive system
-
Weatherproof control box with digital display for welding speed.
-
Travel speed: 0~2200mm/min.
-
Beveled gear drive reducer, good locking ability in both directions
-
Large diameter (Φ 150mm) steel roller flux support belt to allow flux recycling.
-
Standard 380V/3ph/50 Hz; 220V/1ph/50 Hz input (other optional); Electrical cabinet with CE marking
-
Heavy duty blower type flux recovery system with filter
For further information, please feel free to contact Karen Peng (email: foreigntrade07@autowelds.com)
- Adopt sub-arc welding technology;
- Applicable to bottom-to-top tank erection, hanged on shell top;
- First X-RAY qualification rate above 99%;
- More suitable for erection of tanks larger than 30M;
- Two welding systems, high efficient welding.
AUTO Automatic Girth Seam Welding Machine (AGW) series products are a kind of effective and efficient automatic equipment, which can complete the welding of butt joint girth seams with capabilities of one-off compulsory shaping of welding seams.
It has below Features:
-
Applicable for "top to bottom" storage tanks outside welding of girth seam
-
Suitable for tank radium 4.5 m and over
-
Adjustable welding-traveling frame height for tank shell plate 1.5m to 2.8m wide
-
Suitable for tank plate wall thickness is from 10mm to 50mm.
-
The cross slide of welding head can move 10cm horizontal and 10cm vertical
-
Motor frequency inverter drive system
-
Weatherproof control box with digital display for welding speed.
-
Travel speed: 0~2200mm/min.
-
Beveled gear drive reducer, good locking ability in both directions
-
Large diameter (Φ 150mm) steel roller flux support belt to allow flux recycling.
-
Standard 380V/3ph/50 Hz; 220V/1ph/50 Hz input (other optional); Electrical cabinet with CE marking
-
Heavy duty blower type flux recovery system with filter
For further information, please feel free to contact Karen Peng (email: foreigntrade07@autowelds.com)